{"title":"Boost Gauges and Pods","description":"\u003cp\u003e\u003cspan\u003eA boost gauge is a pressure gauge that indicates air pressure produced by a turbocharger or supercharger. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eVUDU Performance only stock the best products with years of tried and tested experience. We can also offer fitting and dyno testing in our workshop using our trained technicians.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a boost controller?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA boost controller is a device to control the boostlevel produced in the intake manifold of a turbocharged or supercharged engine by affecting the air pressure delivered to the pneumatic and mechanical wastegate actuator.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eDual Stage \u003cbr\u003e\u003c\/strong\u003eFast boost response with two adjustable boost levels. Toggle between high and low boost on the fly. Ideal replacement for factory boost controllers. Both high and low boost settings are fully adjustable.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eIn - Cabin\u003cbr\u003e\u003c\/strong\u003eControl the boost from the driver’s seat. Ideal for the active enthusiast who wants boost adjustment on the run. Detent System makes adjusting a breeze. Gated System brings boost on faster.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eManual Boost Controllers\u003cbr\u003e\u003c\/strong\u003eSmaller and lighter than other Manual Boost Controllers on the market. Set your boost and forget it. Boost adjustable from under the hood with an accurate, proven Detent System. Easy to install and adjust.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ee-Boost Street\u003cbr\u003e\u003c\/strong\u003e2 Boost Settings: easily selected via the “turn-and-push” button. An external switch can also be used to change between boost groups if required.\u003c\/p\u003e\n\u003cp\u003eBoost Correction Factor: eliminates boost drop off at high RPM.\u003c\/p\u003e\n\u003cp\u003e3 Segment Display: with adjustable brightness can be configured for PSI, KPa, or BAR and will flash when warning of over boost shutdown or rev limit, allowing the unit to be used as a boost gauge, tachometer, or a shift light.\u003c\/p\u003e\n\u003cp\u003eMaximum Boost Level: 40PSI \/ 2.72BAR.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ee-Boost 2\u003cbr\u003e\u003c\/strong\u003ee-Boost2 allows the user to control, monitor, map and compensate boost. But e-Boost2 is a lot more than just a boost controller – it can also control water spray, methanol or nitrous injection, manage shift\/warning lights and read\/monitor RPM. While e-Boost2 is fitted with a state-of-the art software, it has been designed to be easy and logical to use.\u003c\/p\u003e","products":[{"product_id":"turbosmart-eb2-66mm-dual-shift-silver","title":"Turbosmart eB2 66mm Dual Shift","description":"\u003cp\u003eWarning Light Ring Mount - suit Turbosmart e-Boost2. Allows fitment of 2 x LED Warning lights (various colors available). LED's sold seperately.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Black","offer_id":7896235525,"sku":"TS-0301-2018","price":74.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-66mm-dual-shift-silver.jpg?v=1571295150"},{"product_id":"turbosmart-eb2-66mm-roll-cage-mount","title":"Turbosmart eB2 66mm Roll Cage Mount","description":"\u003cp\u003eMount (Roll Cage) - Suit e-Boost2. Professional mounting system for the Turbosmart e-Boost2. Mount Allows fitment of the e-Boost2 to your curved surfaces such as your rollcage, including adjustable mount and clamps.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896235589,"sku":"TS-0301-2014","price":82.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-66mm-coll-cage-mount.jpg?v=1571295150"},{"product_id":"turbosmart-eb2-66mm-dash-mounting-system","title":"Turbosmart eB2 66mm Dash Mounting System","description":"\u003cp\u003eMount (Dash Mount) - Suit e-Boost2. Professional mounting system for the Turbosmart e-Boost2. Mount Allows fitment of the e-Boost2 to your flat surfaces such as your dash and interior trim, including adjustable mount and fasteners.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896235717,"sku":"TS-0301-2013","price":82.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-66mm-dash-mounting-system.jpg?v=1571295150"},{"product_id":"turbosmart-eb2-60mm-dual-shift-warning-light-ring-mount-silver","title":"Turbosmart eB2 60mm Dual Shift Warning Light Ring Mount","description":"\u003cp\u003eWarning Light Ring Mount - suit Turbosmart e-Boost2. Allows fitment of 2 x LED Warning lights (various colors available). LED's sold seperately.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Black","offer_id":7896236485,"sku":"TS-0301-2007","price":50.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-60mm-dual-shift-silver.jpg?v=1571295151"},{"product_id":"turbosmart-eb2-60mm-roll-cage-mount","title":"Turbosmart eB2 60mm Roll Cage Mount","description":"\u003cp\u003eMount (Roll Cage) - Suit e-Boost2. Professional mounting system for the Turbosmart e-Boost2. Mount Allows fitment of the e-Boost2 to your curved surfaces such as your rollcage, including adjustable mount and clamps.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896236933,"sku":"TS-0301-2002","price":74.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-60mm-roll-cage-mount.jpg?v=1571295151"},{"product_id":"turbosmart-eb2-60mm-dash-mounting-system","title":"Turbosmart eB2 60mm Dash Mounting System","description":"\u003cp\u003eMount (Dash Mount) - Suit e-Boost2. Professional mounting system for the Turbosmart e-Boost2. Mount Allows fitment of the e-Boost2 to your flat surfaces such as your dash and interior trim, including adjustable mount and fasteners.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896236997,"sku":"TS-0301-2001","price":74.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/eb2-60mm-dash-mounting-system.jpg?v=1571295151"},{"product_id":"gbcv-ss-ds-mounting-bracket","title":"Turbosmart GBCV SS\/DS Mounting Bracket","description":"\u003cp\u003eReplacement mounting bracket for 'Dual Stage' Manual Boost Controller.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896262341,"sku":"TS-0105-3001","price":16.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/gbcv-ss-ds-mounting-bracket.jpg?v=1571295168"},{"product_id":"boost-tee-in-cabin-mount-bracket","title":"Boost-Tee\/In Cabin Mount Bracket","description":"\u003cp\u003eMounting Bracket for 'Boost Tee' and 'In Cabin' Manual Boost Controllers.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896262725,"sku":"TS-0101-3001","price":16.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/boost-tee-in-cabin-mount-bracket.jpg?v=1571295168"},{"product_id":"turbosmart-boost-gauge-0-2-bar-52mm","title":"Turbosmart Boost Gauge 0-2 Bar 52mm","description":"\u003ch2\u003eTurbosmart Boost Gauge 0-2 Bar 52mm\u003c\/h2\u003e\n\u003cp\u003eThe Turbosmart mechanical boost gauge is the perfect accessory for any of the Turbosmart Gated Boost Control Valves.\u003c\/p\u003e\n\u003cp\u003eFitting most turbocharged vehicles, the Boost Gauge features simple mechanical operation, a black face with silver bezel, bright backlighting and vacuum to 2Bar range.\u003c\/p\u003e\n\u003cp\u003eAll hook-up and panel mounting hardware included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTurbosmart Product Code: TS-0101-2025 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more about the Boost Gauge in the YouTube clip from Turbosmart below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"690\" height=\"388\" src=\"https:\/\/www.youtube.com\/embed\/LTKuN7ovegw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitting the Boost Gauge can be quite complicated, therefore Turbosmart recommend the gauge be fitted and adjusted by an appropriately qualified technician.\u003c\/p\u003e\n\u003cp\u003ePlease contact the team at VUDU Performance to discuss fitting the Turbosmart Boost Gauge on your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall or Email to discuss:\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eT:\u003c\/strong\u003e 01924 228042 | \u003cstrong\u003eE:\u003c\/strong\u003e sales@vuduperformance.com\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896262789,"sku":"TS-0101-2025","price":58.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/boost-gauge-0-2-bar-52mm.jpg?v=1571295169"},{"product_id":"boost-gauge-mnt-cup-52mm-ts-0101-2024","title":"Turbosmart Boost Gauge Mounting Cup 52mm","description":"\u003cp\u003e\u003cspan class=\"sku\"\u003eTS-0101-2024\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Gauge Mounting Cup is the ideal accessory for the Turbosmart Boost Gauge.\u003c\/p\u003e\n\u003cp\u003eThe Boost Gauge Mounting Cups are perfectly sized to grip and hold any 52mm Turbosmart Boost Gauge.\u003c\/p\u003e\n\u003cp\u003eEasy to mount and manufactured from aluminium, the Turbosmart Boost Gauge Cup features a clean black finish that can easily adjust up and down.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896262917,"sku":"TS-0101-2024","price":34.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/boost-gauge-mnt-cup-52mm.jpg?v=1571295169"},{"product_id":"turbosmart-boost-gauge-0-30psi-52mm","title":"Turbosmart Boost Gauge 0-30psi 52mm","description":"\u003ch2\u003eTurbosmart 0-30psi Turbosmart Boost Gauge (52mm)\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe 0-30psi Turbosmart Boost Gauge suits most turbocharged vehicles, making it t\u003c\/span\u003e\u003cspan\u003ehe perfect accessory for tuning enthusiasts with Gated Boost Control Valves.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA simple mechanical operation, the 52mm Turbosmart Boost Gauge shows off a black face inside a silver bezel with bright back-lighting and vacuum up to 30psi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTurbosmart Product Code: TS-0101-2023\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLearn more from Turbosmart themselves in the clip below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"690\" height=\"388\" src=\"https:\/\/www.youtube.com\/embed\/LTKuN7ovegw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequire a Fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact the team at VUDU Performance to discuss fitting the 0-30psi Turbosmart Boost Gauge on your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall or Email to discuss:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTel: \u003c\/span\u003e\u003ca href=\"tel:+441924228042\"\u003e01924 228042\u003c\/a\u003e\u003cspan\u003e | Email: sales@vuduperformance.com\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":7896263621,"sku":"TS-0101-2023","price":58.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/boost-gauge-0-30psi-52mm.jpg?v=1571295169"},{"product_id":"turbosmart-gauge-vudu-vent-pod-kit-ford-fiesta-mk7","title":"Turbosmart Boost Gauge VUDU Vent Pod Kit with boost reference adapter - Ford Fiesta Mk7","description":"\u003ch2\u003eTurbosmart Boost Gauge Vent Pod Kit for the Mk7 Ford Fiesta ST180\u003c\/h2\u003e\n\u003cp\u003eThe VUDU Performance Boost Gauge Kit For Ford Fiesta Mk7 ST180 and 1.0l EcoBoost is available with a Turbosmart boost gauge showing PSI or BAR depending on preference.\u003c\/p\u003e\n\u003cp\u003eFiesta ST Boost Gauge Kits dont come much better than this VUDU branded vent pod and Turbosmart boost gauge\u003c\/p\u003e\n\u003cp\u003eDesigned to allow airflow around the Turbosmart boost gauge and offer a snug fit into the Fiesta ST180 dashboard vent. The newly designed VUDU Vent Pod is printed from high-temperature matt black filament, then 3D printed over 4 hours to produce the finished article.\u003c\/p\u003e\n\u003cp\u003eWe have tested this VUDU Fiesta Boost gauge kit in our in house 350Bhp track cars taking the pocket rocket class victory in style. \u003c\/p\u003e\n\u003cp\u003eThe VUDU boost gauge kit proved invaluable during our racing season says VUDU Performance Director Nick Cook at a glance i was able to understand if the car was making target boost pressure and identify if we had a boost related issue.\u003c\/p\u003e\n\u003cp\u003eAvailable with in-house fitting and in matte black or matte red this is a fantastic upgrade to any boosted Mk7 Fiesta to give you the ability to see what boost pressure your Ford Fiesta ST or 1.0 EcoBoost is producing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull VUDU Vent Pod Kit includes: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 X Turbosmart Boost Gauge ( PSI  or BAR ) \u003c\/li\u003e\n\u003cli\u003e1 X Fiesta Mk7 VUDU Vent Pod ( Ventilated ) in Black or Red\u003c\/li\u003e\n\u003cli\u003e1 X Boost reference adapter ( if required ) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurbosmart Gauge VUDU Vent Pod Kit fits both the Mk7 Fiesta ST and Fiesta 1.0 EcoBoost.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequire a Fitting?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFitting the VUDU Vent Pod Kit will take around 90 minutes to complete and in most\u003cspan\u003e \u003c\/span\u003ecases\u003cspan\u003e, \u003c\/span\u003ethe original dash vent will not be reusable. \u003c\/p\u003e\n\u003cp\u003eIf you would like to have the kit fitted on site, we install the boost gauge in such a way that it illuminates with the cluster lighting meaning the dimming function is available where possible. ( Year dependent ) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease contact the team at VUDU Performance to learn more.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall or Email to discuss:\u003c\/strong\u003e\u003cem\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003c\/em\u003e\u003cspan\u003eT: \u003c\/span\u003e\u003ca href=\"tel:+441924228042\"\u003e01924 228042\u003c\/a\u003e\u003cspan\u003e  |  E: sales@vuduperformance.com\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Black \/ Bar \/ No","offer_id":15856778575975,"sku":"TS-0101-2025 + VUDUVP01","price":78.74,"currency_code":"GBP","in_stock":true},{"title":"Black \/ Bar \/ Yes","offer_id":15856768942183,"sku":"TS-0101-2025 + VUDUVP01 + TS-0720-1003","price":132.68,"currency_code":"GBP","in_stock":true},{"title":"Black \/ PSI \/ No","offer_id":15856778641511,"sku":"TS-0101-2023 + VUDUVP01","price":78.74,"currency_code":"GBP","in_stock":true},{"title":"Black \/ PSI \/ Yes","offer_id":15856778608743,"sku":"TS-0101-2023 + VUDUVP01 + TS-0720-1003","price":132.68,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Bar \/ No","offer_id":15856778707047,"sku":"TS-0101-2025 + VUDUVP01","price":78.74,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Bar \/ Yes","offer_id":15856778674279,"sku":"TS-0101-2025 + VUDUVP01 + TS-0720-1003","price":132.68,"currency_code":"GBP","in_stock":true},{"title":"Red \/ PSI \/ No","offer_id":15856778838119,"sku":"TS-0101-2023 + VUDUVP01","price":78.74,"currency_code":"GBP","in_stock":true},{"title":"Red \/ PSI \/ Yes","offer_id":15856778772583,"sku":"TS-0101-2023 + VUDUVP01 + TS-0720-1003","price":132.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/black_pod.jpg?v=1596017237"},{"product_id":"ford-fiesta-mk7-vent-pod","title":"VUDU Performance Ford Fiesta MK7  VUDU Vent Pod","description":"\u003cp\u003eThe VUDU Performance Ford Fiesta Mk7 VUDU vent gauge pod, \u003c\/p\u003e\n\u003cp\u003eDesigned to still vent air around the boost gauge unlike other items on the market.\u003c\/p\u003e\n\u003cp\u003eThe newly designed VUDU vent pod is printed from high-temperature matt black or red filament, then 3D printed over 4 hours to produce the finished article.  \u003c\/p\u003e\n\u003cp\u003eAvailable with in-house fitting and in 2 colours matt black or matt red this is a fantastic upgrade to any boosted Fiesta giving you the ability to see what boost pressure your Ford Fiesta ST or 1.0ltr is producing. \u003c\/p\u003e\n\u003cp\u003e1x Ventilating VUDU vent pod\u003c\/p\u003e\n\u003cp\u003eIf you require the whole kit please click \u003ca href=\"\/products\/ford-fiesta-mk7-vent-gauge-pod-kit\" target=\"_blank\" title=\"Vent Pod Kit\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/pods_large.jpg?v=1544462233\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"VUDU","offers":[{"title":"Black","offer_id":15856803938407,"sku":"VUDUVP01-B","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Red","offer_id":15856805740647,"sku":"VUDUVP01-R","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/pods_0b883406-fce3-4888-a5ae-f171b20348b4.jpg?v=1571295230"},{"product_id":"turbosmart-boost-gauge-electric-0-30psi","title":"Turbosmart Boost Gauge Electric 0-30PSI","description":"\u003cp\u003e\u003cspan\u003eTurbosmart's Electric Boost Only Gauge is designed specifically for turbo diesel vehicles. Unlike Turbosmart's mechanical boost gauge which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-30 PSI. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSince diesel engines do not produce vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncludes bracket, anti-glare shield, boost sensor, wiring harness, T-piece, PVC hose and inline filter.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFascia diameter (gauge and bezel) - 57mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRear diameter (gauge body) - 52mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":6401023246363,"sku":"TS-0701-1011","price":124.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Only_Gauge_Kit_M.jpg?v=1571295233"},{"product_id":"turbosmart-boost-gauge-electric-0-60-psi","title":"Turbosmart Boost Gauge Electric 0-60 PSI","description":"\u003cp\u003e\u003cspan\u003eTurbosmart's Electric Boost Only Gauge is designed specifically for turbo diesel vehicles. Unlike Turbosmart's mechanical boost gauge which also measures vacuum, the Electric Boost Only gauge measures only boost from 0-60 PSI. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSince diesel engines do not produce vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncludes bracket, anti-glare shield, MAP sensor, wiring harness, and PVC hose.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFascia diameter (gauge and bezel) - 57mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRear diameter (gauge body) - 52mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":6401033076763,"sku":"TS-0701-1012","price":155.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/TS-0701-1012-60PSI-boost-only-kit.jpg?v=1571295233"},{"product_id":"turbosmart-gauge-electric-boost-only-4-bar","title":"Turbosmart Gauge Electric Boost Only 4 Bar","description":"\u003cp\u003e\u003cspan\u003eTurbosmart's Electric Boost Only Gauge is designed specifically for turbo diesel vehicles. Unlike Turbosmart's mechanical boost gauge which also measures vacuum, the Electric Boost Only gauge measures only boost from 4 Bar. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSince diesel engines do not produce vacuum, the Boost Only gauge gives you more accurate boost readings for your turbo diesel vehicle.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIncludes bracket, anti-glare shield, MAP sensor, wiring harness, and PVC hose.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFascia diameter (gauge and bezel) - 57mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRear diameter (gauge body) - 52mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":6401074757659,"sku":"TS-0701-1013","price":155.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/TS-0701-1012-60PSI-boost-only-kit_b674b40b-fc7b-46a7-b427-4234f05b2d68.jpg?v=1571295233"},{"product_id":"turbosmart-gauge-bracket-triple-gauge-l-shape","title":"Turbosmart Gauge Bracket Triple Gauge L-Shape","description":"\u003cp\u003e\u003cspan\u003eManufactured from tough powder-coated steel, Turbosmart's triple gauge L-bracket is an ideal mounting solution for three Turbosmart 52mm gauges.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003eGauges not included\u003c\/i\u003e\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":6401341194267,"sku":"TS-0740-1002","price":28.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/TS07401002_Turbosmart_600x600_550aaf0c-1e74-4b40-8c6f-305a5bff27d7.jpg?v=1571295234"},{"product_id":"ford-fiesta-mk8-boost-gauge-vudu-vent-pod-kit-turbosmart","title":"Ford Fiesta MK8 Boost Gauge Vent Pod Kit - VUDU Performance","description":"\u003ch1\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFiesta ST MK8 Boost Gauge and Vent Pod Kit available now!!\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eWe are excited to introduce to you a first for the Fiesta ST MK8 platform. After such great success on the Fiesta ST180 platform, our VUDU vent pod kit is now available for the Fiesta ST MK8.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eCheck your boost pressure at any time using the Turbosmart boost gauge available in either PSI or BAR coupled with our expertly designed 3d printed VUDU vent pod.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eVUDU Branded Carbon infused vent replacement aesthetically pleasing and functional\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eTurbosmart boost gauge available in PSI or BAR rated to 30psi \/ 2.1Bar\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eFull installation kit included for Fiesta ST MK8 \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003e\u003cstrong\u003eThe benefits of adding the VUDU Ventilation Pod Kit are\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eEasy boost diagnostics \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eUpgrade to the interior look \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-preserver-spaces=\"true\"\u003eSpecific boost pressure analysis \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-preserver-spaces=\"true\"\u003eThis is a full Fiesta ST MK8 boost gauge kit inclusive of all fixings required and extra wire to install at home.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e","brand":"VUDU","offers":[{"title":"PSI \/ Right","offer_id":39597995196596,"sku":"TS-0101-2023 + VUDUVP02","price":88.74,"currency_code":"GBP","in_stock":false},{"title":"PSI \/ Left","offer_id":39597995262132,"sku":"TS-0101-2023 + VUDUVP02","price":88.74,"currency_code":"GBP","in_stock":true},{"title":"Bar \/ Right","offer_id":39597995327668,"sku":"TS-0101-2025 + VUDUVP02","price":88.74,"currency_code":"GBP","in_stock":false},{"title":"Bar \/ Left","offer_id":39597995393204,"sku":"TS-0101-2025 + VUDUVP02","price":88.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/MK8VentPodKit2.jpg?v=1604593950"},{"product_id":"fiesta-st-mk8-vent-pod-vudu","title":"Fiesta ST MK8 Vent Pod - VUDU","description":"\u003ch1\u003eVUDU Vent Pod for Fiesta MK8. \u003c\/h1\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e**PLEASE SPECIFY IF YOU WOULD LIKE A RIGHT-HAND DRIVE OR LEFT-HAND DRIVE VENT POD.**\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThose who already have a boost gauge kit for the Fiesta ST MK8 are now able to mount it in the air vent using this vent pod made in house at VUDU Performance.\u003c\/p\u003e\n\u003cp\u003e3d printed from a carbon-infused filament ensuring ultimate rigidity and enabling airflow so the vent is not rendered useless.\u003c\/p\u003e\n\u003cp\u003eKey features:-\u003c\/p\u003e\n\u003cp\u003e- Impact-resistant 20% carbon-infused filament\u003c\/p\u003e\n\u003cp\u003e- High heat resistance to ensure rigidity \u003c\/p\u003e\n\u003cp\u003e- Functional and aesthetically pleasing upgrade.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe VUDU vent pod is a must-have upgrade for all fiesta st owners after such great success with our fiesta st180 vent pod this had to be a product made with the prestigious VUDU brand.\u003c\/p\u003e","brand":"VUDU","offers":[{"title":"Left Hand Drive Fiesta","offer_id":39496779989172,"sku":"VUDUVP02-L","price":30.0,"currency_code":"GBP","in_stock":true},{"title":"Right Hand Drive Fiesta","offer_id":39496780021940,"sku":"VUDUVP02-R","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/MK8-Vent-Pod.jpg?v=1604592970"},{"product_id":"audi-a5-forge-motorsport-audi-2-0t-ffv-boost-gauge-fitting-kit-forge-motorsport","title":"Audi A5 Forge Motorsport Audi 2.0T FFV Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Audi 2.0T FFV Boost Gauge Fitting Kit\n\u003cp\u003eAudi 2.0T FFV Boost Gauge Fitting Kit\u003c\/p\u003e\n\n\u003cp\u003eAnother unique design by Forge Motorsport. This boost tap will fit the FFV (Flexible Fuel Vehicles) including the Audi A4, A5 and Q5.\u003c\/p\u003e\n\n\u003cp\u003eThis part allows easy fitment of a boost gauge, water meth pressure sensor or a dump valve to the 2.0T engine.\u003c\/p\u003e\n\n\u003cp\u003eThe boost tap itself can be installed without tools in under 10 minutes and is fully reversible should you ever wish to remove it.  Complete with installation instructions.\u003c\/p\u003e\n\n\u003cp\u003eThis is also referred to as the Audi B8.5 boost tap but will not fit all B8.5 vehicles, to further help identify if this will fit the 2.0T you have, please see the engine bay picture.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eApplication List\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2012-on Audi A4,A5 and Q5 with the 2.0 petrol turbo engine\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe part fits many engines within these years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThey are ‘FFV’ or ‘Flexible Fuel Vehicles’.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTo double check, all of the FFV’s have  a sticker inside the petrol cap saying ‘E85 compatible’ . They should also have ‘E85\/Gasoline’ written on the petrol cap itself. The final check is that all the FFV’s have a metal intake manifold rather than plastic. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802389716,"sku":"FMBGFK10","price":12.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Forge_Motorsport_Audi_20T_FFV_Boost_Gauge_Fitting_Kit_47437jpeg.jpg?v=1751033188"},{"product_id":"audi-q5-forge-motorsport-audi-2-0t-ffv-boost-gauge-fitting-kit-forge-motorsport","title":"Audi Q5 Forge Motorsport Audi 2.0T FFV Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Audi 2.0T FFV Boost Gauge Fitting Kit\n\u003cp\u003eAudi 2.0T FFV Boost Gauge Fitting Kit\u003c\/p\u003e\n\n\u003cp\u003eAnother unique design by Forge Motorsport. This boost tap will fit the FFV (Flexible Fuel Vehicles) including the Audi A4, A5 and Q5.\u003c\/p\u003e\n\n\u003cp\u003eThis part allows easy fitment of a boost gauge, water meth pressure sensor or a dump valve to the 2.0T engine.\u003c\/p\u003e\n\n\u003cp\u003eThe boost tap itself can be installed without tools in under 10 minutes and is fully reversible should you ever wish to remove it.  Complete with installation instructions.\u003c\/p\u003e\n\n\u003cp\u003eThis is also referred to as the Audi B8.5 boost tap but will not fit all B8.5 vehicles, to further help identify if this will fit the 2.0T you have, please see the engine bay picture.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cu\u003e\u003cstrong\u003eApplication List\u003c\/strong\u003e\u003c\/u\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2012-on Audi A4,A5 and Q5 with the 2.0 petrol turbo engine\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe part fits many engines within these years.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThey are ‘FFV’ or ‘Flexible Fuel Vehicles’.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTo double check, all of the FFV’s have  a sticker inside the petrol cap saying ‘E85 compatible’ . They should also have ‘E85\/Gasoline’ written on the petrol cap itself. The final check is that all the FFV’s have a metal intake manifold rather than plastic. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802422484,"sku":"FMBGFK10-Q5","price":12.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Forge_Motorsport_Audi_20T_FFV_Boost_Gauge_Fitting_Kit_47437jpeg_780178f8-5dda-4dc1-a3d5-d2942f9ca8c1.jpg?v=1751033187"},{"product_id":"bmw-1-series-forge-motorsport-boost-tap-for-mini-f54-f55-f56-forge-motorsport","title":"BMW 1 Series Forge Motorsport Boost Tap for Mini F54\/F55\/F56- Forge Motorsport","description":"Forge Motorsport Boost Tap for Mini F54\/F55\/F56\n13628637899\n\u003cp\u003eForge Motorsport Boost Tap for the Mini F56 and F55.  The adaptor plate is installed between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eSimple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM T-Map Sensor Part Number: 13628637899\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn The Box:\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003ex1 Forge Motorsport Mini F56 \u0026amp; F55 Boost Tap\u003cbr\u003e\nx1 M6x16 Cap Head Bolt\u003cbr\u003e\nx1 3 meter length of 4mm Vacuum Hose\u003cbr\u003e\nx10 Cable Ties\u003cbr\u003e\nx1 Forge Motorsport Sticker\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802488020,"sku":"FMBGFK11","price":50.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Forge_Motorsport_Boost_Tap_for_Mini_F54F55F56_70629jpeg.jpg?v=1751033187"},{"product_id":"mini-f60-countryman-2017-forge-motorsport-boost-tap-for-mini-f54-f55-f56-forge-motorsport","title":"Mini F60 Countryman 2017- Forge Motorsport Boost Tap for Mini F54\/F55\/F56- Forge Motorsport","description":"Forge Motorsport Boost Tap for Mini F54\/F55\/F56\n13628637899\n\u003cp\u003eForge Motorsport Boost Tap for the Mini F56 and F55.  The adaptor plate is installed between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eSimple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM T-Map Sensor Part Number: 13628637899\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn The Box:\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003ex1 Forge Motorsport Mini F56 \u0026amp; F55 Boost Tap\u003cbr\u003e\nx1 M6x16 Cap Head Bolt\u003cbr\u003e\nx1 3 meter length of 4mm Vacuum Hose\u003cbr\u003e\nx10 Cable Ties\u003cbr\u003e\nx1 Forge Motorsport Sticker\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802520788,"sku":"FMBGFK11-COU","price":50.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Forge_Motorsport_Boost_Tap_for_Mini_F54F55F56_70629jpeg_e0d1e340-7d3b-470b-93dd-672862a0d96d.jpg?v=1751033186"},{"product_id":"mini-third-generation-f54-f55-f56-f57-forge-motorsport-boost-tap-for-mini-f54-f55-f56-forge-motorsport","title":"Mini Third generation (F54\/F55\/F56\/F57) Forge Motorsport Boost Tap for Mini F54\/F55\/F56- Forge Motorsport","description":"Forge Motorsport Boost Tap for Mini F54\/F55\/F56\n13628637899\n\u003cp\u003eForge Motorsport Boost Tap for the Mini F56 and F55.  The adaptor plate is installed between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eSimple to fit using the existing MAP screw, hardware and fitting instructions which are supplied and the application is fully reversible. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM T-Map Sensor Part Number: 13628637899\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn The Box:\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003ex1 Forge Motorsport Mini F56 \u0026amp; F55 Boost Tap\u003cbr\u003e\nx1 M6x16 Cap Head Bolt\u003cbr\u003e\nx1 3 meter length of 4mm Vacuum Hose\u003cbr\u003e\nx10 Cable Ties\u003cbr\u003e\nx1 Forge Motorsport Sticker\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802553556,"sku":"FMBGFK11-MIN","price":50.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Forge_Motorsport_Boost_Tap_for_Mini_F54F55F56_70629jpeg_b23284f7-51ee-4322-87b8-90373c8596f0.jpg?v=1751033185"},{"product_id":"bmw-1-series-boost-tap-for-bmw-forge-motorsport","title":"BMW 1 Series Boost Tap for BMW- Forge Motorsport","description":"Boost Tap for BMW\n\u003cp\u003eThis adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following BMW MAP sensors:\u003cbr\u003e\n \u003cstrong\u003e13627551429\u003cbr\u003e\n 13627585493\u003cbr\u003e\n 13627599042\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBMW Compatible Vehicles:\u003cbr\u003e\n1' F20  (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F20 LCI (05\/2014 — 06\/2016)\u003cbr\u003e\n1' F21 (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F21 LCI (09\/2014 — 06\/2016)\u003cbr\u003e\n2' F22 (10\/2012 — 06\/2016)\u003cbr\u003e\n2' F87 M2 LCI (10\/2016 — 12\/2018)\u003cbr\u003e\n2' F23 (04\/2014 — 06\/2016)\u003cbr\u003e\n3' F30 (02\/2011 — 01\/2016)\u003cbr\u003e\n3' F30 LCI (10\/2014 — 10\/2018)\u003cbr\u003e\n3' F80 M3 (04\/2012 — 06\/2015)\u003cbr\u003e\n3' F80 M3 LCI (01\/2015 — 10\/2018)\u003cbr\u003e\n3' F31 (07\/2011 — 06\/2015)\u003cbr\u003e\n3' F31 LCI (12\/2014 — 06\/2016)\u003cbr\u003e\n3' F34 GT (07\/2012 — 06\/2016)\u003cbr\u003e\n3' F35 (06\/2011 — 08\/2015)\u003cbr\u003e\n3' F35 LCI (01\/2015 — 08\/2016)\u003cbr\u003e\n4' F32 (11\/2012 — 01\/2017)\u003cbr\u003e\n4' F82 M4 (02\/2013 — 02\/2017)\u003cbr\u003e\n4' F82 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F33 (03\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 (06\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F36 Gran Coupé (07\/2013 — 12\/2016)\u003cbr\u003e\n5' F07 GT LCI (08\/2012 — 02\/2017)\u003cbr\u003e\n5' F10 (06\/2010 — 10\/2016)\u003cbr\u003e\n5' F10 LCI (10\/2012 — 10\/2016)\u003cbr\u003e\n5' F11 (06\/2010 — 06\/2013)\u003cbr\u003e\n5' F11 LCI (10\/2012 — 02\/2017)\u003cbr\u003e\n5' F18 (03\/2011 — 08\/2013)\u003cbr\u003e\n5' F18 LCI (10\/2012 — 04\/2017)\u003cbr\u003e\n5' F90 M5 (01\/2016 — 12\/2018)\u003cbr\u003e\n6' F06 Gran Coupé (10\/2011 — 02\/2015)\u003cbr\u003e\n6' F06 Gran Coupé LCI (09\/2014 — 09\/2018)\u003cbr\u003e\n6' F12 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F12 LCI (05\/2014 — 05\/2018)\u003cbr\u003e\n6' F13 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F13 LCI (06\/2014 — 10\/2017)\u003cbr\u003e\nX1 E84 (04\/2009 — 12\/2015)\u003cbr\u003e\nX3 F25 (02\/2011 — 08\/2017)\u003cbr\u003e\nX4 F26 (05\/2013 — 03\/2018)\u003cbr\u003e\nX5 F15 (10\/2014 — 06\/2018)\u003cbr\u003e\nX5 M F85 (04\/2013 — 06\/2018)\u003cbr\u003e\nX6 F16 (11\/2014 — 12\/2018)\u003cbr\u003e\nX6 M F86 (10\/2013 — 12\/2018)\u003cbr\u003e\nZ4 E89 (01\/2011 — 08\/2016)\u003cbr\u003e\nMS BMW Motorsport ( — )\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Black Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nFixing screws (x2)\u003cbr\u003e\n4mm Vacuum Hose (x3m)\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802586324,"sku":"FMBGFK12","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Tap_for_BMW_62593jpeg.jpg?v=1751033185"},{"product_id":"bmw-2-series-boost-tap-for-bmw-forge-motorsport","title":"BMW 2 Series Boost Tap for BMW- Forge Motorsport","description":"Boost Tap for BMW\n\u003cp\u003eThis adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following BMW MAP sensors:\u003cbr\u003e\n \u003cstrong\u003e13627551429\u003cbr\u003e\n 13627585493\u003cbr\u003e\n 13627599042\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBMW Compatible Vehicles:\u003cbr\u003e\n1' F20  (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F20 LCI (05\/2014 — 06\/2016)\u003cbr\u003e\n1' F21 (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F21 LCI (09\/2014 — 06\/2016)\u003cbr\u003e\n2' F22 (10\/2012 — 06\/2016)\u003cbr\u003e\n2' F87 M2 LCI (10\/2016 — 12\/2018)\u003cbr\u003e\n2' F23 (04\/2014 — 06\/2016)\u003cbr\u003e\n3' F30 (02\/2011 — 01\/2016)\u003cbr\u003e\n3' F30 LCI (10\/2014 — 10\/2018)\u003cbr\u003e\n3' F80 M3 (04\/2012 — 06\/2015)\u003cbr\u003e\n3' F80 M3 LCI (01\/2015 — 10\/2018)\u003cbr\u003e\n3' F31 (07\/2011 — 06\/2015)\u003cbr\u003e\n3' F31 LCI (12\/2014 — 06\/2016)\u003cbr\u003e\n3' F34 GT (07\/2012 — 06\/2016)\u003cbr\u003e\n3' F35 (06\/2011 — 08\/2015)\u003cbr\u003e\n3' F35 LCI (01\/2015 — 08\/2016)\u003cbr\u003e\n4' F32 (11\/2012 — 01\/2017)\u003cbr\u003e\n4' F82 M4 (02\/2013 — 02\/2017)\u003cbr\u003e\n4' F82 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F33 (03\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 (06\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F36 Gran Coupé (07\/2013 — 12\/2016)\u003cbr\u003e\n5' F07 GT LCI (08\/2012 — 02\/2017)\u003cbr\u003e\n5' F10 (06\/2010 — 10\/2016)\u003cbr\u003e\n5' F10 LCI (10\/2012 — 10\/2016)\u003cbr\u003e\n5' F11 (06\/2010 — 06\/2013)\u003cbr\u003e\n5' F11 LCI (10\/2012 — 02\/2017)\u003cbr\u003e\n5' F18 (03\/2011 — 08\/2013)\u003cbr\u003e\n5' F18 LCI (10\/2012 — 04\/2017)\u003cbr\u003e\n5' F90 M5 (01\/2016 — 12\/2018)\u003cbr\u003e\n6' F06 Gran Coupé (10\/2011 — 02\/2015)\u003cbr\u003e\n6' F06 Gran Coupé LCI (09\/2014 — 09\/2018)\u003cbr\u003e\n6' F12 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F12 LCI (05\/2014 — 05\/2018)\u003cbr\u003e\n6' F13 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F13 LCI (06\/2014 — 10\/2017)\u003cbr\u003e\nX1 E84 (04\/2009 — 12\/2015)\u003cbr\u003e\nX3 F25 (02\/2011 — 08\/2017)\u003cbr\u003e\nX4 F26 (05\/2013 — 03\/2018)\u003cbr\u003e\nX5 F15 (10\/2014 — 06\/2018)\u003cbr\u003e\nX5 M F85 (04\/2013 — 06\/2018)\u003cbr\u003e\nX6 F16 (11\/2014 — 12\/2018)\u003cbr\u003e\nX6 M F86 (10\/2013 — 12\/2018)\u003cbr\u003e\nZ4 E89 (01\/2011 — 08\/2016)\u003cbr\u003e\nMS BMW Motorsport ( — )\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Black Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nFixing screws (x2)\u003cbr\u003e\n4mm Vacuum Hose (x3m)\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802619092,"sku":"FMBGFK12-BM2","price":53.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Tap_for_BMW_62593jpeg_a11310f8-e1ec-49b9-9b84-333227959a59.jpg?v=1751033184"},{"product_id":"bmw-3-series-boost-tap-for-bmw-forge-motorsport","title":"BMW 3 Series Boost Tap for BMW- Forge Motorsport","description":"Boost Tap for BMW\n\u003cp\u003eThis adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following BMW MAP sensors:\u003cbr\u003e\n \u003cstrong\u003e13627551429\u003cbr\u003e\n 13627585493\u003cbr\u003e\n 13627599042\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBMW Compatible Vehicles:\u003cbr\u003e\n1' F20  (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F20 LCI (05\/2014 — 06\/2016)\u003cbr\u003e\n1' F21 (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F21 LCI (09\/2014 — 06\/2016)\u003cbr\u003e\n2' F22 (10\/2012 — 06\/2016)\u003cbr\u003e\n2' F87 M2 LCI (10\/2016 — 12\/2018)\u003cbr\u003e\n2' F23 (04\/2014 — 06\/2016)\u003cbr\u003e\n3' F30 (02\/2011 — 01\/2016)\u003cbr\u003e\n3' F30 LCI (10\/2014 — 10\/2018)\u003cbr\u003e\n3' F80 M3 (04\/2012 — 06\/2015)\u003cbr\u003e\n3' F80 M3 LCI (01\/2015 — 10\/2018)\u003cbr\u003e\n3' F31 (07\/2011 — 06\/2015)\u003cbr\u003e\n3' F31 LCI (12\/2014 — 06\/2016)\u003cbr\u003e\n3' F34 GT (07\/2012 — 06\/2016)\u003cbr\u003e\n3' F35 (06\/2011 — 08\/2015)\u003cbr\u003e\n3' F35 LCI (01\/2015 — 08\/2016)\u003cbr\u003e\n4' F32 (11\/2012 — 01\/2017)\u003cbr\u003e\n4' F82 M4 (02\/2013 — 02\/2017)\u003cbr\u003e\n4' F82 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F33 (03\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 (06\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F36 Gran Coupé (07\/2013 — 12\/2016)\u003cbr\u003e\n5' F07 GT LCI (08\/2012 — 02\/2017)\u003cbr\u003e\n5' F10 (06\/2010 — 10\/2016)\u003cbr\u003e\n5' F10 LCI (10\/2012 — 10\/2016)\u003cbr\u003e\n5' F11 (06\/2010 — 06\/2013)\u003cbr\u003e\n5' F11 LCI (10\/2012 — 02\/2017)\u003cbr\u003e\n5' F18 (03\/2011 — 08\/2013)\u003cbr\u003e\n5' F18 LCI (10\/2012 — 04\/2017)\u003cbr\u003e\n5' F90 M5 (01\/2016 — 12\/2018)\u003cbr\u003e\n6' F06 Gran Coupé (10\/2011 — 02\/2015)\u003cbr\u003e\n6' F06 Gran Coupé LCI (09\/2014 — 09\/2018)\u003cbr\u003e\n6' F12 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F12 LCI (05\/2014 — 05\/2018)\u003cbr\u003e\n6' F13 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F13 LCI (06\/2014 — 10\/2017)\u003cbr\u003e\nX1 E84 (04\/2009 — 12\/2015)\u003cbr\u003e\nX3 F25 (02\/2011 — 08\/2017)\u003cbr\u003e\nX4 F26 (05\/2013 — 03\/2018)\u003cbr\u003e\nX5 F15 (10\/2014 — 06\/2018)\u003cbr\u003e\nX5 M F85 (04\/2013 — 06\/2018)\u003cbr\u003e\nX6 F16 (11\/2014 — 12\/2018)\u003cbr\u003e\nX6 M F86 (10\/2013 — 12\/2018)\u003cbr\u003e\nZ4 E89 (01\/2011 — 08\/2016)\u003cbr\u003e\nMS BMW Motorsport ( — )\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Black Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nFixing screws (x2)\u003cbr\u003e\n4mm Vacuum Hose (x3m)\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802651860,"sku":"FMBGFK12-BM3","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Tap_for_BMW_62593jpeg_818b22c6-14d7-4fa5-8b3a-b30f180adb22.jpg?v=1751033183"},{"product_id":"bmw-4-series-boost-tap-for-bmw-forge-motorsport","title":"BMW 4 Series Boost Tap for BMW- Forge Motorsport","description":"Boost Tap for BMW\n\u003cp\u003eThis adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following BMW MAP sensors:\u003cbr\u003e\n \u003cstrong\u003e13627551429\u003cbr\u003e\n 13627585493\u003cbr\u003e\n 13627599042\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBMW Compatible Vehicles:\u003cbr\u003e\n1' F20  (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F20 LCI (05\/2014 — 06\/2016)\u003cbr\u003e\n1' F21 (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F21 LCI (09\/2014 — 06\/2016)\u003cbr\u003e\n2' F22 (10\/2012 — 06\/2016)\u003cbr\u003e\n2' F87 M2 LCI (10\/2016 — 12\/2018)\u003cbr\u003e\n2' F23 (04\/2014 — 06\/2016)\u003cbr\u003e\n3' F30 (02\/2011 — 01\/2016)\u003cbr\u003e\n3' F30 LCI (10\/2014 — 10\/2018)\u003cbr\u003e\n3' F80 M3 (04\/2012 — 06\/2015)\u003cbr\u003e\n3' F80 M3 LCI (01\/2015 — 10\/2018)\u003cbr\u003e\n3' F31 (07\/2011 — 06\/2015)\u003cbr\u003e\n3' F31 LCI (12\/2014 — 06\/2016)\u003cbr\u003e\n3' F34 GT (07\/2012 — 06\/2016)\u003cbr\u003e\n3' F35 (06\/2011 — 08\/2015)\u003cbr\u003e\n3' F35 LCI (01\/2015 — 08\/2016)\u003cbr\u003e\n4' F32 (11\/2012 — 01\/2017)\u003cbr\u003e\n4' F82 M4 (02\/2013 — 02\/2017)\u003cbr\u003e\n4' F82 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F33 (03\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 (06\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F36 Gran Coupé (07\/2013 — 12\/2016)\u003cbr\u003e\n5' F07 GT LCI (08\/2012 — 02\/2017)\u003cbr\u003e\n5' F10 (06\/2010 — 10\/2016)\u003cbr\u003e\n5' F10 LCI (10\/2012 — 10\/2016)\u003cbr\u003e\n5' F11 (06\/2010 — 06\/2013)\u003cbr\u003e\n5' F11 LCI (10\/2012 — 02\/2017)\u003cbr\u003e\n5' F18 (03\/2011 — 08\/2013)\u003cbr\u003e\n5' F18 LCI (10\/2012 — 04\/2017)\u003cbr\u003e\n5' F90 M5 (01\/2016 — 12\/2018)\u003cbr\u003e\n6' F06 Gran Coupé (10\/2011 — 02\/2015)\u003cbr\u003e\n6' F06 Gran Coupé LCI (09\/2014 — 09\/2018)\u003cbr\u003e\n6' F12 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F12 LCI (05\/2014 — 05\/2018)\u003cbr\u003e\n6' F13 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F13 LCI (06\/2014 — 10\/2017)\u003cbr\u003e\nX1 E84 (04\/2009 — 12\/2015)\u003cbr\u003e\nX3 F25 (02\/2011 — 08\/2017)\u003cbr\u003e\nX4 F26 (05\/2013 — 03\/2018)\u003cbr\u003e\nX5 F15 (10\/2014 — 06\/2018)\u003cbr\u003e\nX5 M F85 (04\/2013 — 06\/2018)\u003cbr\u003e\nX6 F16 (11\/2014 — 12\/2018)\u003cbr\u003e\nX6 M F86 (10\/2013 — 12\/2018)\u003cbr\u003e\nZ4 E89 (01\/2011 — 08\/2016)\u003cbr\u003e\nMS BMW Motorsport ( — )\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Black Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nFixing screws (x2)\u003cbr\u003e\n4mm Vacuum Hose (x3m)\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802684628,"sku":"FMBGFK12-BM4","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Tap_for_BMW_62593jpeg_eda26abf-5c22-495b-9091-25c5beba495f.jpg?v=1751033183"},{"product_id":"bmw-m3-boost-tap-for-bmw-forge-motorsport","title":"BMW M3 Boost Tap for BMW- Forge Motorsport","description":"Boost Tap for BMW\n\u003cp\u003eThis adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following BMW MAP sensors:\u003cbr\u003e\n \u003cstrong\u003e13627551429\u003cbr\u003e\n 13627585493\u003cbr\u003e\n 13627599042\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eBMW Compatible Vehicles:\u003cbr\u003e\n1' F20  (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F20 LCI (05\/2014 — 06\/2016)\u003cbr\u003e\n1' F21 (07\/2010 — 02\/2015)\u003cbr\u003e\n1' F21 LCI (09\/2014 — 06\/2016)\u003cbr\u003e\n2' F22 (10\/2012 — 06\/2016)\u003cbr\u003e\n2' F87 M2 LCI (10\/2016 — 12\/2018)\u003cbr\u003e\n2' F23 (04\/2014 — 06\/2016)\u003cbr\u003e\n3' F30 (02\/2011 — 01\/2016)\u003cbr\u003e\n3' F30 LCI (10\/2014 — 10\/2018)\u003cbr\u003e\n3' F80 M3 (04\/2012 — 06\/2015)\u003cbr\u003e\n3' F80 M3 LCI (01\/2015 — 10\/2018)\u003cbr\u003e\n3' F31 (07\/2011 — 06\/2015)\u003cbr\u003e\n3' F31 LCI (12\/2014 — 06\/2016)\u003cbr\u003e\n3' F34 GT (07\/2012 — 06\/2016)\u003cbr\u003e\n3' F35 (06\/2011 — 08\/2015)\u003cbr\u003e\n3' F35 LCI (01\/2015 — 08\/2016)\u003cbr\u003e\n4' F32 (11\/2012 — 01\/2017)\u003cbr\u003e\n4' F82 M4 (02\/2013 — 02\/2017)\u003cbr\u003e\n4' F82 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F33 (03\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 (06\/2013 — 02\/2017)\u003cbr\u003e\n4' F83 M4 LCI (05\/2016 — 12\/2018)\u003cbr\u003e\n4' F36 Gran Coupé (07\/2013 — 12\/2016)\u003cbr\u003e\n5' F07 GT LCI (08\/2012 — 02\/2017)\u003cbr\u003e\n5' F10 (06\/2010 — 10\/2016)\u003cbr\u003e\n5' F10 LCI (10\/2012 — 10\/2016)\u003cbr\u003e\n5' F11 (06\/2010 — 06\/2013)\u003cbr\u003e\n5' F11 LCI (10\/2012 — 02\/2017)\u003cbr\u003e\n5' F18 (03\/2011 — 08\/2013)\u003cbr\u003e\n5' F18 LCI (10\/2012 — 04\/2017)\u003cbr\u003e\n5' F90 M5 (01\/2016 — 12\/2018)\u003cbr\u003e\n6' F06 Gran Coupé (10\/2011 — 02\/2015)\u003cbr\u003e\n6' F06 Gran Coupé LCI (09\/2014 — 09\/2018)\u003cbr\u003e\n6' F12 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F12 LCI (05\/2014 — 05\/2018)\u003cbr\u003e\n6' F13 (03\/2011 — 02\/2015)\u003cbr\u003e\n6' F13 LCI (06\/2014 — 10\/2017)\u003cbr\u003e\nX1 E84 (04\/2009 — 12\/2015)\u003cbr\u003e\nX3 F25 (02\/2011 — 08\/2017)\u003cbr\u003e\nX4 F26 (05\/2013 — 03\/2018)\u003cbr\u003e\nX5 F15 (10\/2014 — 06\/2018)\u003cbr\u003e\nX5 M F85 (04\/2013 — 06\/2018)\u003cbr\u003e\nX6 F16 (11\/2014 — 12\/2018)\u003cbr\u003e\nX6 M F86 (10\/2013 — 12\/2018)\u003cbr\u003e\nZ4 E89 (01\/2011 — 08\/2016)\u003cbr\u003e\nMS BMW Motorsport ( — )\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Black Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nFixing screws (x2)\u003cbr\u003e\n4mm Vacuum Hose (x3m)\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802717396,"sku":"FMBGFK12-M3","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Tap_for_BMW_62593jpeg_40b9f9ee-dcb4-4493-a7d7-c9d931e5d6d3.jpg?v=1751033182"},{"product_id":"audi-a1-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Audi A1 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802750164,"sku":"FMBGFK13-A1","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0.jpg?v=1751033181"},{"product_id":"audi-a3-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Audi A3 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802815700,"sku":"FMBGFK13-A3","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_4bc350bf-22b2-4e85-b2f9-9475989d683d.jpg?v=1751033181"},{"product_id":"seat-arona-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Seat Arona 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802848468,"sku":"FMBGFK13-ARO","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_18e42909-4e54-41a2-ba55-6ac42ce75221.jpg?v=1751033180"},{"product_id":"seat-ibiza-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Seat Ibiza 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802881236,"sku":"FMBGFK13-IBI","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_f5f7faf1-2f84-4c57-8406-03a387ff90ce.jpg?v=1751033179"},{"product_id":"seat-toledo-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Seat Toledo 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802914004,"sku":"FMBGFK13-TOL","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_43f40779-16af-4507-8a14-273510671830.jpg?v=1751033179"},{"product_id":"skoda-fabia-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Skoda Fabia 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802946772,"sku":"FMBGFK13-FAB","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_96a5b914-563b-4f88-aca3-7360f27eb58a.jpg?v=1751033178"},{"product_id":"skoda-rapid-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Skoda Rapid 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949802979540,"sku":"FMBGFK13-RAP","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_d8d910e0-22f6-4d45-9b13-03bd00e13eab.jpg?v=1751033178"},{"product_id":"volkswagen-golf-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Volkswagen Golf 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803012308,"sku":"FMBGFK13","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_d9d18a49-a288-446f-87b7-7cf738ad48b2.jpg?v=1751033177"},{"product_id":"volkswagen-polo-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Volkswagen Polo 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803077844,"sku":"FMBGFK13-POL","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_629d7f56-2d3c-4b2e-97a2-b6ed9930e715.jpg?v=1751033176"},{"product_id":"volkswagen-t-roc-1-0-tsi-boost-gauge-fitting-kit-forge-motorsport","title":"Volkswagen T-Roc 1.0 TSI Boost Gauge Fitting Kit- Forge Motorsport","description":"Forge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines. - PR-TJ4 and DKR\n\u003cp\u003eForge Motorsport Boost Gauge Fitting Kit for 1.0 TSI Engines.This boost adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eHardware including silicone hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp align=\"center\"\u003eBoost Adapter\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\nCork gasket\u003cbr\u003e\nFixing Screws\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible Vehicles Engine Codes: \u003c\/strong\u003e\u003cstrong\u003ePR-TJ4 and DKR\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitting time: 1 hour\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" class=\"center-block\" src=\"\/userfiles\/Install%20Levels\/3.jpg\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803110612,"sku":"FMBGFK13-TRO","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/10_TSI_Boost_Gauge_Fitting_Kit_78408_0_0a3ee65d-ee24-42bc-ab7e-2911fde36355.jpg?v=1751033175"},{"product_id":"audi-a1-boost-tap-for-vw-1-2tsi-2012-onwards-forge-motorsport","title":"Audi A1 Boost Tap for VW 1.2TSI 2012 onwards- Forge Motorsport","description":"FMBGFK15\n\u003cp\u003eForge Motorsport Boost Tap Kit for 1.2 TSI Engines with code \u003cstrong\u003eCBZA\u003c\/strong\u003e, \u003cstrong\u003eCBZB \u003c\/strong\u003eor \u003cstrong\u003eCBZC\u003c\/strong\u003e. This adaptor installs between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSelf tapping screws (x2)\u003cbr\u003e\nCap head bolts (x2)\u003cbr\u003e\nCork gasket\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803143380,"sku":"FMBGFK15-A1","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_tap_for_VW_12TSI_2012_on_16946.jpg?v=1751033175"},{"product_id":"seat-ibiza-boost-tap-for-vw-1-2tsi-2012-onwards-forge-motorsport","title":"Seat Ibiza Boost Tap for VW 1.2TSI 2012 onwards- Forge Motorsport","description":"FMBGFK15\n\u003cp\u003eForge Motorsport Boost Tap Kit for 1.2 TSI Engines with code \u003cstrong\u003eCBZA\u003c\/strong\u003e, \u003cstrong\u003eCBZB \u003c\/strong\u003eor \u003cstrong\u003eCBZC\u003c\/strong\u003e. This adaptor installs between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSelf tapping screws (x2)\u003cbr\u003e\nCap head bolts (x2)\u003cbr\u003e\nCork gasket\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803208916,"sku":"FMBGFK15-IBI","price":52.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_tap_for_VW_12TSI_2012_on_16946_d4774fa0-fd37-48fb-911c-857584754a9f.jpg?v=1751033174"},{"product_id":"skoda-fabia-boost-tap-for-vw-1-2tsi-2012-onwards-forge-motorsport","title":"Skoda Fabia Boost Tap for VW 1.2TSI 2012 onwards- Forge Motorsport","description":"FMBGFK15\n\u003cp\u003eForge Motorsport Boost Tap Kit for 1.2 TSI Engines with code \u003cstrong\u003eCBZA\u003c\/strong\u003e, \u003cstrong\u003eCBZB \u003c\/strong\u003eor \u003cstrong\u003eCBZC\u003c\/strong\u003e. This adaptor installs between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSelf tapping screws (x2)\u003cbr\u003e\nCap head bolts (x2)\u003cbr\u003e\nCork gasket\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803241684,"sku":"FMBGFK15-FAB","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_tap_for_VW_12TSI_2012_on_16946_6dc61798-0e4c-4a16-b577-ac1be22fae63.jpg?v=1751033173"},{"product_id":"volkswagen-polo-boost-tap-for-vw-1-2tsi-2012-onwards-forge-motorsport","title":"Volkswagen Polo Boost Tap for VW 1.2TSI 2012 onwards- Forge Motorsport","description":"FMBGFK15\n\u003cp\u003eForge Motorsport Boost Tap Kit for 1.2 TSI Engines with code \u003cstrong\u003eCBZA\u003c\/strong\u003e, \u003cstrong\u003eCBZB \u003c\/strong\u003eor \u003cstrong\u003eCBZC\u003c\/strong\u003e. This adaptor installs between the boost (MAP) sensor and the intake manifold.\u003c\/p\u003e\n\n\u003cp\u003eA simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003eIn the Box:\u003cbr\u003e\nSmall Forge Sticker\u003cbr\u003e\n3.5mm Vac Port\u003cbr\u003e\nCable ties (x10)\u003cbr\u003e\nSelf tapping screws (x2)\u003cbr\u003e\nCap head bolts (x2)\u003cbr\u003e\nCork gasket\u003cbr\u003e\n4mm Vacuum Hose\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803274452,"sku":"FMBGFK15-POL","price":53.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_tap_for_VW_12TSI_2012_on_16946_90da6e04-8eaa-4843-b616-003c337a8e49.jpg?v=1751033173"},{"product_id":"audi-rs3-boost-gauge-and-water-meth-fitting-kit-for-audi-ttrs-8s-rs3-8v-facelift-and-8y-forge-motorsport","title":"Audi RS3 Boost Gauge and Water Meth Fitting Kit for Audi TTRS 8S \u0026 RS3 8V Facelift and 8Y- Forge Motorsport","description":"Forge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 \n\nDAZA engine codes -  BMW part number 13627843531\n\u003cp\u003eForge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 (DAZA Engine Codes) as well as BMW's with part number \u003cstrong\u003e13627843531\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe adaptor in this kit is machined from solid billet and offers two additional ports. One port including pipe fitting can be used for a dump valve or boost gauge to be fitted, the second port will accept a 1\/8” NPT fitting which can be used for water meth.\u003c\/p\u003e\n\n\u003cp\u003eTwo plugs are included allowing one or both ports to be blanked off at any time. No modifications are required to OE parts making the install fully reversible. Hardware, including fitting instructions are supplied.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003cbr\u003e\nBoost tap adapter\u003cbr\u003e\nPipe fittings\u003cbr\u003e\n2x Plugs\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803307220,"sku":"FMBGFK18-RS3","price":103.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_and_Water_Meth_Fitting_Kit_for_Audi_TTRS_8S_RS3_Facelift_46385jpeg.jpg?v=1751033172"},{"product_id":"audi-ttrs-boost-gauge-and-water-meth-fitting-kit-for-audi-ttrs-8s-rs3-8v-facelift-and-8y-forge-motorsport","title":"Audi TTRS Boost Gauge and Water Meth Fitting Kit for Audi TTRS 8S \u0026 RS3 8V Facelift and 8Y- Forge Motorsport","description":"Forge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 \n\nDAZA engine codes -  BMW part number 13627843531\n\u003cp\u003eForge Motorsport Boost Tap Kit for Audi TTRS 8S and Audi RS3 (DAZA Engine Codes) as well as BMW's with part number \u003cstrong\u003e13627843531\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe adaptor in this kit is machined from solid billet and offers two additional ports. One port including pipe fitting can be used for a dump valve or boost gauge to be fitted, the second port will accept a 1\/8” NPT fitting which can be used for water meth.\u003c\/p\u003e\n\n\u003cp\u003eTwo plugs are included allowing one or both ports to be blanked off at any time. No modifications are required to OE parts making the install fully reversible. Hardware, including fitting instructions are supplied.\u003c\/p\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003cbr\u003e\nBoost tap adapter\u003cbr\u003e\nPipe fittings\u003cbr\u003e\n2x Plugs\u003cbr\u003e\n \u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803339988,"sku":"FMBGFK18-TTRS","price":103.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_and_Water_Meth_Fitting_Kit_for_Audi_TTRS_8S_RS3_Facelift_46385jpeg_f91c7109-8875-4a6b-b560-98950b6f997c.jpg?v=1751033171"},{"product_id":"alfa-romeo-giulia-boost-gauge-fitting-kit-for-fiat-and-alfa-romeo-giulia-quadrifoglio-forge-motorsport","title":"Alfa Romeo Giulia Boost Gauge Fitting Kit for Fiat and Alfa Romeo Giulia Quadrifoglio- Forge Motorsport","description":"This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost).\n0 281 002 996\n0 281 002 566\n55219295\n55209194\n\u003cp\u003eThis adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following MAP sensors:\u003cbr\u003e\n\u003cstrong\u003e0 281 002 996\u003cbr\u003e\n0 281 002 566\u003cbr\u003e\n55219295\u003cbr\u003e\n55209194\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803372756,"sku":"FMBGFK19-ROM","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_Fitting_Kit_for_Fiat_and_Alfa_Romeo_Giulia_Quadrifoglio_70071jpeg.jpg?v=1751033170"},{"product_id":"fiat-500-boost-gauge-fitting-kit-for-fiat-and-alfa-romeo-giulia-quadrifoglio-forge-motorsport","title":"Fiat 500 Boost Gauge Fitting Kit for Fiat and Alfa Romeo Giulia Quadrifoglio- Forge Motorsport","description":"This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost).\n0 281 002 996\n0 281 002 566\n55219295\n55209194\n\u003cp\u003eThis adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following MAP sensors:\u003cbr\u003e\n\u003cstrong\u003e0 281 002 996\u003cbr\u003e\n0 281 002 566\u003cbr\u003e\n55219295\u003cbr\u003e\n55209194\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803438292,"sku":"FMBGFK19-500","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_Fitting_Kit_for_Fiat_and_Alfa_Romeo_Giulia_Quadrifoglio_70071jpeg_42e6e0a8-7e99-481f-a2d2-10da3ee575dd.jpg?v=1751033170"},{"product_id":"fiat-595-boost-gauge-fitting-kit-for-fiat-and-alfa-romeo-giulia-quadrifoglio-forge-motorsport","title":"Fiat 595 Boost Gauge Fitting Kit for Fiat and Alfa Romeo Giulia Quadrifoglio- Forge Motorsport","description":"This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost).\n0 281 002 996\n0 281 002 566\n55219295\n55209194\n\u003cp\u003eThis adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following MAP sensors:\u003cbr\u003e\n\u003cstrong\u003e0 281 002 996\u003cbr\u003e\n0 281 002 566\u003cbr\u003e\n55219295\u003cbr\u003e\n55209194\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803471060,"sku":"FMBGFK19-5952","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_Fitting_Kit_for_Fiat_and_Alfa_Romeo_Giulia_Quadrifoglio_70071jpeg_b87a9a3f-c0ac-4c68-9d19-db508b286eca.jpg?v=1751033169"},{"product_id":"fiat-595-a-turismo-165bhp-boost-gauge-fitting-kit-for-fiat-and-alfa-romeo-giulia-quadrifoglio-forge-motorsport","title":"Fiat 595 \u003e Turismo 165BHP Boost Gauge Fitting Kit for Fiat and Alfa Romeo Giulia Quadrifoglio- Forge Motorsport","description":"This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost).\n0 281 002 996\n0 281 002 566\n55219295\n55209194\n\u003cp\u003eThis adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following MAP sensors:\u003cbr\u003e\n\u003cstrong\u003e0 281 002 996\u003cbr\u003e\n0 281 002 566\u003cbr\u003e\n55219295\u003cbr\u003e\n55209194\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803503828,"sku":"FMBGFK19-595","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_Fitting_Kit_for_Fiat_and_Alfa_Romeo_Giulia_Quadrifoglio_70071jpeg_e2269ecd-5968-4963-bdea-fff594b26d1b.jpg?v=1751033168"},{"product_id":"fiat-695-boost-gauge-fitting-kit-for-fiat-and-alfa-romeo-giulia-quadrifoglio-forge-motorsport","title":"Fiat 695 Boost Gauge Fitting Kit for Fiat and Alfa Romeo Giulia Quadrifoglio- Forge Motorsport","description":"This adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost).\n0 281 002 996\n0 281 002 566\n55219295\n55209194\n\u003cp\u003eThis adaptor can be fitted to the map sensor on the intake manifold (for vacuum and boost) or on the charge pipe (for boost). Simply remove the existing sensor, fit the Forge Motorsport adaptor and refit the original sensor to the adaptor. This provides a take-off port to connect a vacuum operated valve or a boost gauge without having to cut into any original equipment. \u003c\/p\u003e\n\n\u003cp\u003eVacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the following MAP sensors:\u003cbr\u003e\n\u003cstrong\u003e0 281 002 996\u003cbr\u003e\n0 281 002 566\u003cbr\u003e\n55219295\u003cbr\u003e\n55209194\u003c\/strong\u003e\u003c\/p\u003e","brand":"Forge Motorsport","offers":[{"title":"Default Title","offer_id":43949803700436,"sku":"FMBGFK19-6952","price":49.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1038\/3156\/products\/Boost_Gauge_Fitting_Kit_for_Fiat_and_Alfa_Romeo_Giulia_Quadrifoglio_70071jpeg_43a62204-2534-455a-873c-2ddf43cee693.jpg?v=1751033168"}],"url":"https:\/\/vuduperformance.com\/collections\/boost-controllers-gauges-accessories\/product-type_interior-styling.oembed","provider":"VUDU Performance","version":"1.0","type":"link"}