Under £250: Powerflex

PFF19-2525 PFF19-2525 Lower Engine Mount Insert is crafted from our Yellow 70ShA material and specifically engineered for petrol engines, or tuned diesel engines. Installing an insert into the upper portion of the voided cast rubber limits movement within the mount...

PFF36-604G PFF36-604G Front Upper Arm Bush Camber Adjustable is a Black 95 ShA polyurethane bush with a CNC-machined stainless-steel adjusting sleeve with offset bore and paired spanner allowing for up to +/- 0.5° of on-car camber adjustment and a 20% increase in...

PFF3-1302 Made in our Black 95A material with a tapered bore to reduce stress during articulation, this bush fits vehicles with the combination of an aluminium subframe (OE Part No. 5Q0199369, 5WA199369A and 3Q0199369E) and pressed-steel wishbones only. For vehicles...

PFF25-903-23 In front-heavy, front-engine, front-wheel-drive cars, controlling vehicle body roll is key to managing understeer. A larger anti-roll bar is normally used to minimise weight transfer, thus reducing body-roll but heavy use and age can wear the rubber bushes used...

PFR5-417 PFR5-417 is manufactured from our Purple 80ShA material to provide more control and longevity to the rear damper/swing arm assembly.    PFR5-417BLK PFR3-127BLK is crafted from our Black 95ShA material to provide even greater stiffness and connection between the...

PFR5-416 - yellow (normal everyday drive)   PFR5-416BLK - Black (race/sport)   OEM Part Number: 33506767010 / 33506771737 / 33506771738 Size 10mm or 12mm For standard shock absorbers and performance shock absorber with a 10mm thread use PFR5-416. PFR5-416-12 fits...

PF3-1401 - purple normal drive Made using our range-topping Black 95A durometer polyurethane, these new bushes feature self-lubricating, inner PTFE-lined DU bearings with stainless-steel sleeves, housed in a mild-steel outer shell with supporting washers for compact packaging. This combination of...

PFF5-2303-29 - normal drive Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to...

PFR5-2313-26 - NORMAL DRIVE Made in our 95A Durometer material to restore performance, precision and cornering stability, enhancing the driving experience of your vehicle. Each set of bushes comes with appropriately sized, precision machined Anti-Roll Bar Lateral Support Clamps, to...

PFR75-311   OEM Part Number: Arm = 1044427-00-C OEM Part Number: Arm = 1188421-00-A  SOLD AS PAIR - NEEDED FOR CAR  FITS: Tesla Model 3 (2017 - 2023), Tesla Model Y (2020 - ON)

PFR85-513G - NORMAL DRIVE PFR85-513G Rear Upper Wishbone Outer Bush is a camber adjustable version of our existing PFR85-513 Rear Wishbone Outer Bush for a variety of VAG models. Made in our Black 95A durometer material and supplied with a...

This is a replacement part that in our Black material is 200% stiffer than the original rubber bush to withstand increased loading seen by this position on the car. For a caster offset version please use PFF5-1901G. OEM Part Number:...

 Powerflex’s Magnetic Power Align Camber Gauge is a must-have to ensure correct wheel alignment.   Fitting Instructions: 1. To zero the gauge, use a spirit level, offer the gauge up to the vertical level and adjust the bubble to the zero point with...

PFR5-413 Purple Series- Normal Drive Made in Black 95A, this cotton-reel design pairs a stainless-steel inner sleeve with a zinc-plated CNC-machined outer shell for articulation, durability, and improved load distribution.  OEM Part Number: Arm = 33322406292 / 33 32 2...

PF3-1663 PFF3-1663 Jacking Point Insert is a 95A durometer polyurethane bung that presses up into the vacant hole in the chassis providing a fit and forget solution for safer lifting - Recommended for lifting across 4 lift points simultaneously to...